Skip to content
Çilek Havuz

Manual Pool Cleaning Equipment

Shark Series Cleaning Equipment, Pool Vacuum Head and Cleaning Set.

Shark Series Cleaning Equipment is a family of manual pool cleaning equipment that brings the vacuum head, brushes, leaf nets and poles together in one series. Çilek Havuz supplies Shark Series through quotes and as part of its projects. The series has 11 products: a flexible 8-wheel vacuum head, an oval vacuum head with brushes, 450 and 350 mm curved brushes, a suction corner brush, flat and deep leaf nets, two telescopic poles, a floating dispenser and a floating analogue thermometer.

Datasheet

CH-TEM-0005-05

Shark series flexible pool vacuum head seen at an angle, blue body, white wheels
Vacuum head
Flexible 8-wheel, oval with brushes
List price
From €15.75 + VAT

Prices are list prices dated 16.06.2026, excluding VAT.

Before you choose

Suitable pool and installation

Models and price

11 models

List price €15.75 - €102.90 excl. VAT

Lowest list price: Shark corner brush with suction

List price, excluding VAT. The final figure depends on quantity and scope and is given in the quotation.

Open the spec sheet
See all models and technical data

Compatibility and connections

Vacuum head
Flexible 8-wheel, oval with brushes
Brush width
450 and 350 mm
Pole length
1.8-3.6 m and 2.4-4.8 m
Hose
Floating hose

// Models

Shark Series Cleaning Equipment models, with list prices and technical data.

11 products

  • Flexible 8-wheel pool vacuum head

    Code CH-TEM-0005-01

    Price€55.65 + VAT
  • Oval pool vacuum head (with brush)

    Code CH-TEM-0005-02

    Price€35.70 + VAT
  • Shark curved brush 450 mm

    Code CH-TEM-0005-03

    Width
    450 mm
    Price€19.95 + VAT
  • Shark floor/wall curved brush 350 mm

    Code CH-TEM-0005-04

    Width
    350 mm
    Price€19.95 + VAT
  • Shark corner brush with suction

    Recommended

    Code CH-TEM-0005-05

    Price€15.75 + VAT

    Shark corner brush with suction

    Code CH-TEM-0005-05

    €15.75 + VAT

    Manufacturer Code
    36617
    Width
    - mm
    Length
    - m
    Capacity
    -
    Standard packaging (units per carton)
    12
  • Shark flat skimmer net, clip-on

    Code CH-TEM-0005-06

    Price€22.05 + VAT
  • Shark deep leaf net, clip-on

    Code CH-TEM-0005-07

    Price€23.10 + VAT
  • Shark 1.8-3.6 m telescopic pole

    Code CH-TEM-0005-08

    Length
    1.8 - 3.6 m
    Price€98.70 + VAT
  • Shark 2.4-4.8 m telescopic pole

    Code CH-TEM-0005-09

    Length
    2.4 - 4.8 m
    Price€102.90 + VAT
  • Shark floating dispenser 4 x 200 g

    Code CH-TEM-0005-10

    Capacity
    4 tablets x 200 g
    Price€18.90 + VAT
  • Shark floating analogue thermometer

    Code CH-TEM-0005-11

    Price€56 + VAT

// 01 · Technical table

Shark Series Cleaning Equipment technical values

Where a value changes from model to model, every option is listed in that row; the details for each model are in the model list below.

Shark Series Cleaning Equipment technical values · 11 models
SpecificationValue
Manufacturer Code36618 / 40997 / 36615 / 36616 / 36617 / 36613 / 36614 / 38422 / 38423 / 36620 / 36622
Width- mm / 450 mm / 350 mm
Length- m / 1.8 - 3.6 m / 2.4 - 4.8 m
Capacity4 tablets x 200 g (on some models)
Standard packaging (units per carton)6 / 5 / 10 / 15 / 12

// 02 · Use

Users and applications

The Shark series is chosen to build the vacuum head, brush, leaf net and pole elements of manual cleaning from the same manufacturer series. The flexible 8-wheel vacuum head and the oval vacuum head with brushes clean the floor, the curved brushes brush the floor and wall, and the suction corner brush cleans the corners. The leaf nets remove leaves; the floating dispenser and analogue thermometer support water care.

  • Cleaning the floor with the flexible 8-wheel or oval brushed vacuum head
  • Brushing the floor and wall with the 450 or 350 mm curved brush
  • Cleaning corners with the suction corner brush
  • Removing leaves with the flat or deep leaf net

// 03 · Installation and compatibility

Installation and compatible equipment

The vacuum head, brushes and leaf nets fit onto the end of the pole; the leaf nets are secured with a clip. The vacuum head is connected to the filtration line with a hose, chosen from the Floating Pool Hose and Accessories products. Poles are available within the series in 1.8-3.6 m and 2.4-4.8 m ranges. The floating dispenser and analogue thermometer are released into the pool water.

  1. The vacuum head, brush or leaf net is chosen for the cleaning task.
  2. The chosen product is fitted to the end of the pole; the leaf net is secured with a clip.
  3. If the vacuum head is to be used, it is connected to the filtration line with a hose.
  4. The pole is extended to suit the width of the pool.

// 04 · Maintenance

Maintenance checkpoints

The series products are rinsed with clean water after each use. Sand and leaves collected in the vacuum head wheel housings and the brush bristles are removed. The net mesh is checked for tears. The floating dispenser is emptied and rinsed after use, and the thermometer is washed with clean water and stored in a dry place.

  • Rinsing the products with clean water after use
  • Cleaning dirt from the wheel housings and bristles
  • Checking the net mesh
  • Rinsing and storing the dispenser and thermometer

// 05 · Information form

Request information on this product

Leave your name and contact details, and your customer representative will get back to you about the models of this product, its fit for your pool and an up-to-date quote.

Subject of the form

Shark Series Cleaning Equipment

Product
Shark Series Cleaning Equipment
Category
Manual Pool Cleaning Equipment
Number of models
11
Code
CH-TEM-0005-01 ... CH-TEM-0005-11

Your request is recorded under the name of this product. If you prefer not to wait, you can also reach us on +90 216 475 39 37.

Your contact details

Name, surname, phone and email are enough.

Your personal data is processed in line with our Privacy Notice (KVKK).

// 06 · Reviews

Shark Series Cleaning Equipment reviews

If you use this product or have used our service for it, share your experience. Every review is published after our team verifies it, and ratings are calculated from verified reviews only.

Average rating

0/5

Verified reviews: 0

5 out of 5 stars
0
4 out of 5 stars
0
3 out of 5 stars
0
2 out of 5 stars
0
1 out of 5 stars
0

Reviews are verified and published by the Çilek Havuz team. A product review covers the product itself; a service review covers delivery, installation and communication.

There are no verified reviews for this product yet. Be the first to write one.

Write a review

Write a review

Once verified, your review is published with your name and city. Your email or phone number is never published.

Your rating

What is your review about?

Not published; used only to verify your review.

Your personal data is processed in line with our Privacy Notice (KVKK).

// 07 · Related products

Products considered together

First the products in the same family, then the power, connection and control parts it needs to run, and finally the complementary products usually chosen with it.

// 08 · Services

Work carried out with this product

Shark Series Cleaning Equipment can be purchased on its own or installed as part of a pool construction or maintenance project.

// 09 · Guides

Selection and installation guides

These articles cover the calculations, comparisons and installation details considered when choosing and installing Shark Series Cleaning Equipment.

// 10 · Data sheet and catalogue

Printable documents

The technical data sheet is a single A4 page. The product catalogue brings together the cover, images, model list and technical table.

Pool Maintenance
Product details
Shark Series Cleaning Equipment
Model
11
Code
CH-TEM-0005-01 - CH-TEM-0005-11

// 11 · Design and catalogues

Set up your project on screen first, then review the products in our catalogues.

In the design studio you can build your space with its materials and colours; in the product catalogues you can see models, technical sheets and list prices.

Long villa pool with a travertine edge and olive trees at sunsetPool

Design studio

Build your pool, sauna, steam room or Turkish hammam on screen with lining, timber and marble options, then request a quote with your selection.

Where would you like to start?

Next step

Let us discuss your project in the way that suits you best.

You can fill in the form for a written quote, schedule a video project presentation or ask us to survey your project site.

  • Get a Quote

    Send us your dimensions and expectations in writing.

  • Online presentation

    Video project presentation

  • On-site survey

    Inspection at your project site

// 12 · Company & Contact

To talk about your project, call or write to us.

Legal Name

Çilek Havuz

Founded

1998 · Istanbul

Head Office

Çilek Plaza, Eyüp Sultan Mah. Yakacık Cd. Feshane Cd. No: 2 D:4 D:1, 34885 Sancaktepe / İstanbul

Service Area

All of Türkiye · exports to 14 countries

Branches

Kyrgyzstan · Egypt · Algeria · Iraq

Showroom

Plan a showroom visit

At our showroom in Çilek Plaza, Sancaktepe, you can discuss your project with our team. We recommend booking an appointment by phone before your visit.

Working Hours

  • Monday – Friday · 08:00 – 17:30
  • Saturday · 08:00 – 12:30
  • Closed on Sunday
Directions

Questions

About Shark Series Cleaning Equipment: frequently asked questions

Çilek Havuz Corporate

Pool & Wellness Engineering

Response Time
Same day
Channels
Phone · Email · WhatsApp

If the answer you are looking for is not here, send your question directly to us and our team will reply as soon as possible.

+90 216 475 39 37

The series has 11 products. The vacuum heads are the flexible 8-wheel model and the oval model with brushes; the brushes are the 450 mm and 350 mm curved brushes and the suction corner brush. The leaf nets are flat and deep types, and the poles are 1.8-3.6 m and 2.4-4.8 m long. The series also includes a floating dispenser and a floating analogue thermometer.

Çilek Havuz Corporate

The flexible model has 8 wheels and the oval model has brushes. The flexible model code is 36618 and the oval model code 40997. Quantities per carton are 6 and 5. Both fit the pole and, as vacuum heads, connect to the filtration line with a hose. The choice depends on whether a wheeled or a brushed body is preferred.

Çilek Havuz Corporate

The difference is the width of the brush. The curved brush is 450 mm wide and the floor and wall curved brush 350 mm; their codes are 36615 and 36616. Quantities per carton are 10 and 15. Both fit the pole. The suction corner brush is a separate product from these two brushes, with code 36617.

Çilek Havuz Corporate

The difference is the type of net: flat and deep. Their codes are 36613 and 36614, and the quantity per carton is 6 for both. Both are clip-on and fit the pole with a clip. The type is chosen by where the leaves collect; both are used with the pole of the same Shark series.

Çilek Havuz Corporate

Shark brings the vacuum head, brushes, leaf nets, poles, dispenser and thermometer together in a single product. Blue Line offers the vacuum heads, brushes, leaf nets and poles as four separate products. The Classic range includes aluminium L:350 and L:450 vacuum heads, bristle brushes and four leaf nets. If a complete set from one series is wanted, Shark is the one to look at.

Çilek Havuz Corporate

The vacuum head is connected to the filtration line with a floating hose. Hoses are available in the Floating Pool Hose and Accessories product in Ø38 mm (1½") and Ø50 mm (2") diameters, in lengths between 8 and 30 m. The diameter is chosen to match the connection diameter of the vacuum head. The hose length must cover the farthest point the vacuum head will reach.

Çilek Havuz Corporate

The Shark floating dispenser takes 4 tablets, each of 200 g. The dispenser floats in the pool water. The quantity per carton is 12 and its code is 36620. The series also includes a floating analogue thermometer, with code 36622. Both are ordered under the same product.

Çilek Havuz Corporate