Decorative pool construction
We design the decorative pool around how the water moves, and build it from basin to lighting.

Decorative pool construction process
01 / 04
Basin and waterproofing
Days 7-21- 01
- 02
- 03
- 04
Çilek Havuz in decorative pool construction
We build decorative pools with the same engineering discipline as swimming pools.
One team handles the survey, water feature design, construction and commissioning, and the quotation is itemised line by line.
- Year founded
- 1998
- Years in the industry
- 33+
- Export countries
- 14
- Workmanship warranty
- 2
// 01 · Decision
A decorative pool decision starts with four questions, and the dimensions follow from the answers.
The effect of a decorative pool is settled before any concrete is poured, in the decisions on space, wind and water form. We first clarify where the water will be viewed from, then what the space, the ground and the electrical supply allow.

01
Location and viewpoint of the decorative pool
Water behaves under different rules in a garden, a lobby, a shopping centre courtyard or a square. The viewing direction, pedestrian flow and the noise tolerance of the space determine the pool's form and the scale of the water feature.
- Indoor or outdoor
- Viewing direction and pedestrian flow
- Residence, hotel or public space
02
What the space, ground and electrical supply allow
Every 10 cm of water depth adds 100 kg per square metre to the floor; on lobby and terrace slabs this load is checked in the structural design. The panel, water supply and drainage line are inspected on site during the survey.
- Ground and slab load capacity
- Water supply and drainage line
- Location of panel, cabling and plant room
03
Water form and type
A fountain lifts the water, a water curtain runs it down a vertical surface, and a mirror pool reflects its surroundings on a still surface. Low-noise nozzles suit a lobby, while powerful geyser columns suit a square; the type is chosen by the function of the space.
- Fountain, water curtain or mirror surface
- Cascade or dry deck fountain
- Target noise level
04
Calculating pool size and flow rate
Fountain height does not exceed the distance from the nozzle to the nearest edge; for a central nozzle the short side of the pool is at least twice the height. Water curtain flow is calculated per metre of width, filtration flow by water volume.
- Short side and fountain height
- Water curtain width and flow
- Volume and filtration turnover
// 01 · Decorative pool types
There are six types of decorative pool, and we choose by the space.
We build six decorative pool models: fountain pool, mirror pool, water wall and water curtain, cascade waterfall, dry deck fountain and planted garden pool. The type is chosen during the survey according to the space, viewing distance and noise target.

01 / 06
Fountain decorative pool
Water columns rising from nozzles.
- Water form
- Jet, foam, geyser
- Basin
- Reinforced concrete basin
- Setting
- Indoor or outdoor
- Noise level
- Varies by nozzle
Jet, foam or geyser nozzles lift the water from the centre of the pool, and underwater fixtures light the columns at night. Fountain height is limited by the short side of the pool, and a wind sensor is added in open areas.
Best suited toVilla garden, hotel entrance, square
Explore in detail: Fountain decorative poolWater columns rising from nozzles.

- Water form
- Jet, foam, geyser
- Basin
- Reinforced concrete basin
- Setting
- Indoor or outdoor
- Noise level
- Varies by nozzle
Jet, foam or geyser nozzles lift the water from the centre of the pool, and underwater fixtures light the columns at night. Fountain height is limited by the short side of the pool, and a wind sensor is added in open areas.
Best suited toVilla garden, hotel entrance, square
Explore in detail: Fountain decorative pool
01 / 06Fountain decorative pool
- Water form
- Jet, foam, geyser
- Basin
- Reinforced concrete basin
- Setting
- Indoor or outdoor
- Noise level
- Varies by nozzle
Jet, foam or geyser nozzles lift the water from the centre of the pool, and underwater fixtures light the columns at night. Fountain height is limited by the short side of the pool, and a wind sensor is added in open areas.
Best suited toVilla garden, hotel entrance, square
Explore in detail: Fountain decorative poolMirror pool
- Water form
- Still surface
- Basin
- Overflow reinforced concrete
- Setting
- Indoor or outdoor
- Noise level
- Silent
Water spills over the edge as a thin film, the surface stays free of ripples and reflects the building. The overflow is collected in an edge channel and pumped back; the edge level is set to the millimetre.
Best suited toLobby, courtyard, corporate entrance
Explore in detail: Mirror poolWater wall and water curtain
- Water form
- Water curtain
- Basin
- Wall and collection basin
- Setting
- Indoor or outdoor
- Noise level
- Low
Water flows from the wall header as a thin sheet over stone, glass or stainless steel and returns from the collection basin below. Flow is calculated according to the width of the curtain.
Best suited toLobby, terrace, garden wall
Explore in detail: Water wall and water curtainCascade waterfall
- Water form
- Stepped waterfall
- Basin
- Tiered reinforced concrete
- Setting
- Outdoor
- Noise level
- Moderate
Water collects in an upper basin and falls down stepped tiers; each tier edge is finished to keep the sheet even. On sloping gardens it makes use of the level difference and creates a separate night scene with LED lighting.
Best suited toSloping garden, hotel landscape
Explore in detail: Cascade waterfallDry deck fountain
- Water form
- Ground jet
- Basin
- Concealed underground tank
- Setting
- Outdoor
- Noise level
- Moderate
Nozzles are fed from a concealed tank beneath a walkable grating; when the water is off, the area is used as open space. Because people come into contact with the water, filtration and disinfection are built to swimming pool standards.
Best suited toSquare, shopping centre courtyard, residential common area
Explore in detail: Dry deck fountainPlanted garden pool
- Water form
- Stream, small waterfall
- Basin
- Basin with natural stone edge
- Setting
- Outdoor
- Noise level
- Low
A natural stone edge, aquatic plants and a small stream give the garden a natural look. If fish are added, biological filtration is installed and algae control is chosen so that it does not harm living organisms.
Best suited toVilla and residential garden
Explore in detail: Planted garden pool// 01 · Flow calculation
Enter the pool dimensions, and we calculate the flow.
Enter the length, width, water depth, fountain height and water curtain width of the pool; the calculator instantly returns the water volume, filtration and water curtain flow, the edge size required for the fountain and the water load on the floor.
Calculation rule: water volume = length × width × depth; filtration flow = volume ÷ 4, meaning the water passes through the filter once every 4 hours. For a water curtain, about 15 m³/h per metre of width is assumed. Fountain height does not exceed the distance from the nozzle to the nearest edge; for a central nozzle the short side is at least 2 × height, and 4 × height in windy open areas. Every 10 cm of water depth adds 100 kg/m² to the floor. Fountain flow is selected from the nozzle data sheet.
Get a quotation with these dimensions
Send us the pool dimensions, the space and the water form you have in mind; we will finalise the nozzles, pump and lighting during the survey and prepare an itemised quotation.
| Item | Value |
|---|---|
| Water surface | 10.0 m² |
| Water volume | 6.0 m³ |
| Filtration flow (one turnover every 4 hours) | 1.5 m³/h |
| Water curtain flow | 15.0 m³/h |
| Circulation flow (excluding fountain) | 16.5 m³/h |
| Minimum short side for fountain | 2.0 m |
| Minimum short side in windy open areas | 4.0 m |
| Size check | Size suits the fountain |
| Water load on the floor | 600 kg/m² |
| Edge length (coping) | 13.0 m |
// 01 · Basin layers
A decorative pool basin has five layers, and together they keep the water in.
We build the basin from the water side to the ground with finish, adhesive and grout, waterproofing, reinforced concrete shell and blinding concrete. The finish itself does not hold water; watertightness comes from the waterproofing layer beneath and is confirmed by a water test before finishing.

- FinishNatural stone, glass mosaic or ceramic; it gives the water its colour.
- Adhesive and groutFlexible adhesive and grout suitable for underwater use.
- WaterproofingTwo coats of liquid membrane, mesh and tape at corners and fittings.
- Reinforced concrete basinNozzle, light and drain fittings set in place before the pour.
- Blinding concreteA level, load-bearing base on compacted ground.
// Reading plan
Before building a decorative pool, read these six short articles.
The order follows the natural course of a decorative pool decision: water features first, then waterproofing, pump, filtration, lighting and the planted garden pool with living organisms.
Choosing waterfalls and water curtains
The plumbing needs of waterfalls, water curtains and fountains.8 minShort answer
Waterfalls and fountains draw pool water through a pump, lift it and release it back; they therefore need a separate pump, suction inlet and pipe line. We recommend grade 316 stainless steel for parts in constant contact with water.
- 01Basin and waterproofingDays 7-21Reinforced concrete basin, nozzle and light penetrations, waterproofing and water test
- 02Fountain and pumpDays 4-7Nozzle layout, pump, filtration and level switch
- 03Lighting and automationDays 2-3Underwater RGB fixtures, safety transformer and show programming
- 04Testing and handoverDays 1-2Show testing, splash check and user training
Waterproofing
Layer sequence and water retention test.6 minShort answer
In a reinforced concrete basin the sequence is fixed: surface repair, corner chamfer, two coats of liquid membrane, a 24 hour water retention test and only then the finish. Most leaks start at fittings, not across the open surface.
Pump selection
Flow, head and variable speed.5 minShort answer
Pump flow is found by dividing the volume by the turnover time; pipe diameter, line length and bends determine the head. A variable speed pump runs at low speed outside show hours, reducing energy use and noise.
Filter types
The difference between sand, glass and zeolite media.5 minShort answer
Quartz sand retains particles of about 20-40 microns, glass media 9-15 microns and zeolite 3-5 microns. In a decorative pool, clarity is the show itself; the media is chosen together with filter diameter and pump flow.
Pool lighting
Underwater LED, IP68 and safety voltage.6 minShort answer
Underwater fixtures are selected with IP68 protection, supplied at safety extra-low voltage and protected by a residual current device. In a decorative pool the aim is to make the movement on the water surface visible at night.
Ponds and natural pools
Water purified by plants and microorganisms.5 minShort answer
In biological filtration, plant roots and beneficial bacteria in the gravel bed consume excess nutrients in the water. A planted garden pool with fish is built on the same principle at a smaller scale.
Showroom
Plan a showroom visit
At our showroom in Çilek Plaza, Sancaktepe, you can discuss your project with our team. We recommend booking an appointment by phone before your visit.
Working Hours
- Monday to Friday · 08:00-17:30
- Saturday · 08:00-12:30
- Closed on Sunday
// 02 · Cost
Decorative pool cost follows one measure, the scope of the water feature.
In decorative pool construction and fabrication, the budget depends not only on the pool size but on how the water will move. The six factors below explain why quotations for two pools of the same size differ; the exact amount is confirmed in an itemised quotation after the survey.
Basin and construction
Size, depth and form set the concrete, waterproofing and finish.
Number and type of nozzles
Jet, foam and geyser nozzles need different flow and pressure.
Pump and filtration
Curtain and fountain flow increase pump count and power.
Lighting and automation
RGB fixtures, colour shows and wind sensor shape this item.
Finish and edge
Natural stone, glass mosaic or stainless edging change the surface.
Site and infrastructure
Slab checks in lobbies; excavation and line length in gardens.

// 03 · Process
A decorative pool is built in eight steps, each one resting on the last.
The process starts with the survey and water feature design, continues with basin construction and waterproofing, and takes shape with fountains, pumps and lighting. We hand over the decorative pool with show testing, user training and a winter plan.
Survey and design
Site analysis, wind and splash margin, water feature concept and 3D visuals
Approved design and itemised quotation
Basin and waterproofing
Reinforced concrete basin, fittings, waterproofing and water test
A basin that has passed the water test
Water and lighting systems
Nozzle layout, pump and filtration, underwater lighting and automation
Working fountain, pump and lighting layout
Handover
Show testing, splash check, user training and winter plan
A commissioned decorative pool
The eight steps in detail

01 / 08
Site Survey and Space Analysis
A Start That Reads the Space
An ornamental pool works to entirely different rules in a garden, a hotel lobby, a shopping-mall atrium or a public square. Our technical team examines the space on site: viewing directions, pedestrian flow, the bearing condition of the floor and the sound tolerance of the space are all settled on this visit.
The electrical supply, the water supply and drainage options and, outdoors, the prevailing wind direction are assessed the same day; the splash allowance enters the calculation before the concept is even drawn.
- Area dimensions and viewing directions
- Indoor / outdoor decision
- Wind direction and splash allowance
- Electrical supply and panel condition
- Water supply and drainage line
- Floor bearing capacity
- Intended use (residential / commercial)
- Preliminary budget frame
A fountain's first rival is the wind
A fountain designed without allowing for wind carries water onto the surrounding paving rather than into the pool; water loss and a slippery surface arrive together. Resolving the splash allowance at the survey is the cheapest safety measure in the project.
// 04 · Nozzle types
The nozzle gives the water its shape, and we choose it by the space.
The same pump can draw a thin glass-like rod or a foaming column; the nozzle makes the difference. We select nozzles together with spray height, flow, noise level and wind conditions, and use grade 316 stainless steel for parts in constant contact with water.
01Fine jet
Draws clear, thin rods of water like glass. It is quiet and works best indoors and in sheltered courtyards.
Best suited to
- Lobby
- Mirror pool
- Garden
02Foam nozzle
Draws in air to raise a full, white column. It carries light well and stands out under night lighting.
Best suited to
- Garden
- Hotel entrance
03Geyser
Produces a thick, powerful foaming column. It is loud and is used in large pools and public spaces.
Best suited to
- Square
- Large pool
04Cascade header
Pours water as a flat sheet. Flow is calculated by curtain width; the lip is finished precisely for an even flow.
Best suited to
- Water wall
- Cascade waterfall
05Mushroom nozzle
Turns water into a thin, calm dome-shaped film. Its splash margin is small, so it suits narrow pools.
Best suited to
- Lobby
- Small pool
06Swan neck
Pours water in an arc into the pool from a curved stainless steel body on the edge. It is fixed to the ground and fed by a separate pump line.
Best suited to
- Pool edge
- Garden
// 04 · Decorative pool materials
From waterfalls to lighting, we choose materials by water form.
Stainless waterfalls, water curtains, water ball fountains, underwater lighting, pumps and filters are among our products. You can review the flow, dimensions and required head of each product on its own page.
// 05 · Projects
From residential complexes to hotels, projects where we built water features.
We usually plan the decorative pool within the same project as the pool, landscape and spa. In our hotel and residence projects, one team resolved the water, lighting and plant room together.
// 05 · Service regions
Across Türkiye and abroad, we build decorative pools.
We build decorative pools across Türkiye in villa gardens, hotels, shopping centres and public spaces; we export to 14 countries and run projects abroad on site through our branches in Kyrgyzstan, Egypt, Algeria and Iraq.
Türkiye
15- Istanbul
- Mugla / Bodrum
- Antalya
- Izmir / Cesme
- Ankara
- Bursa
- Kocaeli / İzmit
- Adana
- Mersin
- Tekirdağ
- Kandıra
- Sakarya
- Samsun
- Denizli
- Elazığ
Abroad
13- AlgeriaBranch
- EgyptBranch
- IraqBranch
- KyrgyzstanBranch
- France
- Germany
- Kazakhstan
- Libya
- Qatar
- Russia
- Saudi Arabia
- United Arab Emirates
- United Kingdom
// 06 · After handover
Our work does not end at handover, we carry on with maintenance together.
At handover we run every show together and explain filter cleaning, water top-up and winter preparation on site. Our workmanship carries a 2 year warranty.
- 012 years
Warranty
Our construction workmanship is guaranteed for 2 years from handover; warranty documents are provided at handover.
- 021-2 days
Show testing and training
We verify spray heights, splash limits and lighting scenes one by one and explain operation on site.
- 03Weekly
Routine maintenance
The pump basket and filter are cleaned, water clarity is monitored, and nozzles are checked for scale and blockage.
- 04Once a year
Winter preparation
In frost-prone regions the pump and lines are drained, and sensitive nozzles are removed and stored indoors.
Related services
- Swimming Pool ConstructionReinforced-concrete, prefabricated and infinity swimming pools, built turnkey for villa, residential and commercial projects.
- Infinity PoolsPools that open onto the view, with water spilling over the edge into a balance tank.
- Natural PondsNatural-look pond and bio-pool designs.
- Pool MaintenanceWater chemistry, equipment and periodic maintenance.
- Landscape ArchitectureLandscape design that unites the pool with its garden and surroundings.
- Pool ConsultingEngineering consulting on project, materials and budget.
Prepared byAli SAVAŞ · Project Manager · Mechatronics Engineer
// 07 · Questions
About decorative pool construction, frequently asked questions.
Çilek Havuz Corporate
Pool & Wellness Engineering
- Response Time
- Same day
- Channels
- Phone · Email · WhatsApp
If the answer you are looking for is not here, send your question directly to us and our team will reply as soon as possible.
+90 216 475 39 37A garden-scale decorative pool is completed within a few weeks from survey to handover. The schedule is driven mainly by the reinforced concrete basin and waterproofing; this phase takes 1-3 weeks, while fountains, pumps and lighting are installed in a few days. We give the exact schedule in writing after the survey.
Çilek Havuz Corporate
Decorative pool cost is determined by the basin size, the number and type of nozzles, pump and filtration capacity, lighting and finish. Two pools of the same size can correspond to different budgets depending on the scope of the water feature. After the survey we present all items in writing.
Çilek Havuz Corporate
Water depth in decorative pools is usually kept within 30-45 cm. A shallow basin circulates water faster, puts less load on the floor and improves safety. We add the margin needed to keep nozzles and fixtures submerged to the depth.
Çilek Havuz Corporate
Fountain height should not exceed the distance from the nozzle to the nearest edge of the pool. For a central nozzle the short side is at least twice the height; in windy open areas we limit the height to half of that distance.
Çilek Havuz Corporate
In a correctly sized decorative pool the fountain does not wet the surroundings. Spray height is limited by pool size, and in open areas a wind sensor reduces or stops the show when a set wind speed is exceeded. We calculate the splash margin during the survey.
Çilek Havuz Corporate
For a distinct water curtain, about 15 m³/h per metre of width is assumed. A thin water film can be created with about half of that; the flow increases as the fall height increases. A water curtain is usually fed by a pump separate from the filtration.
Çilek Havuz Corporate
Because a decorative pool runs as a closed circuit, water consumption is low. The same water is circulated continuously by the pump; top-up is needed only for evaporation and splash losses, and an automatic water top-up handles this on its own.
Çilek Havuz Corporate
Filtration flow is calculated so that the pool volume passes through the filter once every 4 hours. A pool measuring 4 × 2 m with a depth of 40 cm holds 3.2 m³ of water and requires a filtration flow of 0.8 m³/h. For dry deck fountains this calculation is kept tighter.
Çilek Havuz Corporate
Correctly installed underwater lighting is safe. Fixtures inside the pool are supplied at a safety voltage of no more than 12 V AC or 30 V DC, the transformer is placed outside the water zone, and pump lines are protected by a 30 mA residual current device.
Çilek Havuz Corporate
Hotel lobbies and shopping centre courtyards are among the indoor spaces where decorative pools are most often built. In these spaces, low-noise nozzles, a narrow splash margin and the slab's load and waterproofing details come to the fore; every 10 cm of water depth adds 100 kg/m² to the floor.
Çilek Havuz Corporate
They can; however, living organisms change the filtration design from the outset. A fish pool needs biological filtration, and algae control is chosen so that it does not harm living organisms. Settling this at the start of the project is more economical than changing the system later.
Çilek Havuz Corporate
The basin is cast in reinforced concrete, coated with a liquid membrane and finished with natural stone, glass mosaic or ceramic. We recommend grade 316 stainless steel for waterfalls, fountains and water curtains in constant contact with water; fixtures are selected with IP68 protection.
Çilek Havuz Corporate
Routine maintenance consists of cleaning the pump basket and filter, monitoring water clarity and checking the nozzles. In a pool built with correct filtration this becomes a short weekly routine; we also offer periodic maintenance service to clients who wish.
Çilek Havuz Corporate
In frost-prone regions the pump and lines are drained, and sensitive nozzles are removed and stored indoors. Frozen water can crack pipes, pumps and nozzles; this preparation takes a day, and we provide the winter plan as a written guide at handover.
Çilek Havuz Corporate
Next step
Let us discuss your project in the way that suits you best.
You can fill in the form for a written quote, schedule a video project presentation or ask us to survey your project site.
Get a Quote
Send us your dimensions and expectations in writing.
Online presentation
Video project presentation
On-site survey
Inspection at your project site
// 08 · Company & Contact
To talk about your project, call or write to us.
Legal Name
Çilek Havuz
Founded
1998 · Istanbul
Head Office
Çilek Plaza, Eyüp Sultan Mah. Yakacık Cd. Feshane Cd. No: 2 D:4 D:1, 34885 Sancaktepe / İstanbul
Service Area
All of Türkiye · exports to 14 countries
Branches
Kyrgyzstan · Egypt · Algeria · Iraq
Showroom
Plan a showroom visit
At our showroom in Çilek Plaza, Sancaktepe, you can discuss your project with our team. We recommend booking an appointment by phone before your visit.
Working Hours
- Monday – Friday · 08:00 – 17:30
- Saturday · 08:00 – 12:30
- Closed on Sunday
















