Skip to content
Çilek Havuz

// United Kingdom · hammam and steam room

Hammam and steam room installation in the UK

Çilek Havuz designs and installs Turkish hammams and steam rooms for UK homes and boutique hotels: the marble is cut to your room in our workshop in Turkey, delivered by road and ferry in one load and fitted by our own crew, with a steam generator chosen for hard water and a UK electrician on the mains.

Modern hammam in grey veined marble with a heated platform
28+
years in the trade
14
Export Countries
15
services
3
UK regions

A plan and photos will do

Send the room plan, a few photos and your area. We propose a layout and say which parts need a UK trade.

// 01 · From survey to steam

How a UK hammam job runs

The room is measured before the stone is cut, and the marble arrives in one load, numbered to the fitting plan.

  1. Bronze taps on veined marble, Yalova (Turkey)

    Plans and photos

    Send the room plan, photos and your postcode area. We propose a layout and finishes.

  2. Hammam basins on a herringbone marble wall, Yalova (Turkey)

    Survey

    Final measurements are taken on site or by your architect, and the design is signed off.

  3. Heated marble platform before handover, Istanbul (Turkey)

    Stonework in Turkey

    Slabs are cut and numbered; the generator and heated platform are tested before packing.

  4. Hammam basins and marble floor, Alibeyköy, Istanbul (Turkey)

    Delivery

    One lorry, one date, with customs paperwork prepared in advance.

  5. Private villa hammam with mosaic benches, Istanbul (Turkey)

    Installation

    Our crew fits and commissions the hammam and shows you the routine care.

Hammam and steam room installation in the UK: Hammams and home spas we built in Turkey

Hammams and home spas we built in Turkey

06 media

// 02 · Worth knowing

Six numbers for a hammam in a British home

Climate averages and typical room conditions we use when planning a hammam or steam room in the UK.

Manchester air

Damp

Why does damp matter so much for a UK steam room?

Manchester is one of the wetter British cities. Older houses already hold moisture, so the steam must leave through its own extract.

Request a quotation
Marble hammam with a central platform and basins

// 03 · Before you start

Steam room installation and a Turkish bath at home: what matters in a British house

Most UK projects are indoors, in older buildings, on hard water. These six topics decide the cost, the layout and the upkeep.

Written by Ali SAVAŞ

What drives the cost

The price of a home hammam follows the room, not a catalogue.

  • Room size and ceiling height set the marble quantity and the generator.
  • The marble grade and thickness, a wet heating circuit or an electric mat, and the state of an older building all move the figure.
  • Narrow access and import VAT are listed as separate lines.
  • We quote from your plan and photos, never from a price per square metre.
Marble basin and bench in a hammam, Istanbul (Turkey)

Compare

Hammam UK: how to choose between the main options

For most British houses we recommend pale dense marble, a wet circuit off the existing boiler or heat pump, and a sloped ceiling. The table shows when the other option is better.

DecisionOption 1Option 2Which, and when
MarbleDense white, low porosityColoured or veinedWhite on the platform and wet zone; coloured on dry walls outside the spray
HeatingWet circuit from boiler or heat pumpElectric matWet circuit in a house with a system; electric for a flat or a small room
CeilingDomeSloped ceilingSlope for standard room heights; dome only where the room is tall
Steam sourceHeated platform plus generatorGenerator onlyPlatform makes the steam softer in a larger room; generator alone for a compact cabin
BasinCarved from one blockReady-made basinOne block for a hammam meant to last; ready-made if the budget is tight

Design studio

Plan your home hammam

Choose the room type, the marble and the heating. We check it against your plan and reply with a layout.

Room
Marble
Heating
Plan your home hammam
3 × 2.5 mSteam cabinWhite marbleWet circuit

// 06 · References

Hammams and home spas we have delivered in Turkey

We have not yet installed a hammam in the UK. The homes and hotels below are in Turkey, built by the same workshop and crew that would fit yours.

All projects

// 07 · Cities and regions

London, the North West and the Midlands

House type and water hardness change the job more than the postcode, though London, the North West and the Midlands each have their own habits.

  1. London and the South East

    Townhouses, basements and flats with a spa corridor. Very hard water and tight access.

    July 23 °C · January 2 °C · frost in winter

    Ask about your area
  2. Manchester and the North West

    Homes and hotels with a strong interest in sauna and steam. Wet climate, condensation control first.

    July 20 °C · January 2 °C · frost in winter

    Ask about your area
  3. Birmingham and the West Midlands

    Family homes where a spare room or garage becomes a steam room and sauna.

    Ask about your area

// 08 · Common mistakes

Mistakes we see when hammams go wrong in British homes

Most problems start when a steam room is treated as a shower enclosure. These are the five we meet most.

Steam room door and tiled bench, Istanbul (Turkey)
  1. Tiling a shower enclosure and adding steam

    A tiled cubicle with no tanking behind the tile gets a generator fitted. Steam pushes into plasterboard and the floor, grout fails, and the room next door smells damp. Do it properly: a membrane taken above splash height, a vapour barrier and falls set out before the first tile.

  2. Extract into the loft or bathroom fan

    The steam room extract is pushed into the loft void or joined to the bathroom fan. Warm moist air condenses on cold timbers and mould follows, sometimes with a ceiling stain below. The extract belongs on its own duct to outside with a non-return damper.

  3. No descaling plan

    The generator is fitted on hard water with no flush or softener. Limescale coats the element, the output drops and it burns out within months. The remedy is automatic flushing, softened feed water and a written descaling interval.

  4. Cut marble to a drawing, not a survey

    Slabs are ordered from a plan without checking the walls. Old houses are never square, so joints open and filler appears. Survey first, cut second, and check the access route.

  5. Ordinary internal door

    A standard door in a steam room swells and leaks steam onto the landing, and the paint peels within a season. Use a sealed glass door on a proper seal and threshold, designed together with the ventilation.

// 09 · Cost

What affects the cost of a hammam or steam room installation in the UK

Price follows room volume, marble and the state of the building, not only the floor area. We quote from your plan and photos, so no figures are printed here.

FactorWhat it changes
Room size and ceiling heightMore air to heat and humidify means a bigger generator and more heating power. A high ceiling adds energy demand in a British winter.
Marble grade and thicknessDense pale marble costs more than porous stone, and thick slabs add weight and freight. They stay clean longer and hold heat better.
Heating methodA wet circuit from an existing boiler is cheaper to run but needs pipe runs. Electric mats are quick to install and cost more to use on a regular basis.
Age and condition of the buildingOld walls, uneven floors and limited drainage fall add labour to waterproofing and levelling. New-build walls are usually flatter and cheaper to finish.
Access and deliveryNarrow hallways and stairs slow the hand carry of heavy slabs. Lorry access to the street and a parking suspension can also change the plan.
Import VAT and customsGoods from Turkey arrive with a customs declaration and import VAT. We show both as separate lines so you can see the full cost.

What you receive at handover

  1. Installation drawings with pipework and drainage diagram.
  2. Leak and pressure test record and commissioning sheet.
  3. A walk-through for you or your staff on running the room.
  4. Maintenance calendar covering descaling, seals and the extract.
  5. List of spare parts with recommended stock.
  6. Product documents and operating manuals for the equipment.

// 10 · Frequently asked questions

Questions about a hammam in the UK.

Çilek Havuz Technical Team

Pool & Wellness Engineering

Response Time
Same day
Channels
Phone · Email · WhatsApp

If the answer you are looking for is not here, send your question directly to us and our team will reply as soon as possible.

Request a quotation

Both use moist heat. A steam room is usually a sealed cabin with benches. A Turkish hammam adds a heated marble platform in the centre, marble basins with running water and a washing ritual, so it takes a little more space and more stonework.

Çilek Havuz Technical Team

Not if it is managed. We fit automatic flushing or a softener and set a descaling interval from your water report.

Çilek Havuz Technical Team

Our crew installs the equipment; the mains connection and certification can be done by a registered UK electrician, arranged by us or by you.

Çilek Havuz Technical Team

Goods from Turkey are declared at the border and import VAT applies. We list these costs separately in the quotation so there are no surprises on delivery.

Çilek Havuz Technical Team

The cost of a home hammam depends on the size of the room, the marble, the heating and how easy the access is. We give a figure only after seeing plans and photos, and the quotation lists every line.

Çilek Havuz Technical Team

Often yes. What matters is a route for the extract to outside, a drain with enough fall and a floor that takes the weight of marble. A leasehold flat may also need the freeholder's consent.

Çilek Havuz Technical Team

Less than most people expect. A steam cabin fits in the footprint of a shower room, and a hammam with a heated central platform needs roughly the floor of a small bedroom. We confirm it from your plan and ceiling height.

Çilek Havuz Technical Team

Not yet. Our finished hammams are in Turkey and are shown on this page, and the same workshop and crew would cut and install yours in the UK.

Çilek Havuz Technical Team

// 11 · Quotation

Send us the room plan

A plan, a few photos and your area are enough for a first layout. We will also tell you which parts need a UK trade.

Phone:+90 216 475 39 37

Are you an installer, dealer or architect in the region? Become a partner

Home hammam in cream marble with a floral fountain niche and a lit platform
  1. Send the room plan
  2. Receive a layout and quote
  3. Book the survey and install