Control Panels
Connect & Go Expansion Modules, Smart Cabinet Expansion Module.
Connect & Go Expansion Modules are five separate modules that add extra lighting or extra pump control to an existing Connect & Go cabinet. Çilek Havuz supplies Connect & Go Modules through quotes and as part of its projects. Two modules carry a 100 VA transformer for white or RGB light. Three modules manage two auxiliary pumps with On, Off and Auto positions and suit 1, 2 or 3 HP single-phase pumps.
CH-OTM-0004-01
- Cabinet
- Connect & Go cabinets
- List price
- From €567 + VAT
Prices are list prices dated 16.06.2026, excluding VAT.
Suitable pool and installation
Models and price
5 models
List price €567 - €2,362.50 excl. VAT
Lowest list price: Expansion module · white light
List price, excluding VAT. The final figure depends on quantity and scope and is given in the quotation.
See all models and technical dataCompatibility and connections
- Cabinet
- Connect & Go cabinets
- Light module
- White or RGB, 100 VA
- Pump module
- 2 pumps, 1, 2 or 3 HP
- Pump phase
- Single-phase
// Models
Connect & Go Expansion Modules models, with list prices and technical data.
5 products
Expansion module · white light
RecommendedCode CH-OTM-0004-01
- App
- Supply and control of additional white lighting
Price€567 + VATExpansion module · RGB multicolour light
Code CH-OTM-0004-02
- App
- Supply and control of additional RGB multicolour lighting
Price€1,470 + VATExpansion module · 2 pumps 1 HP
Code CH-OTM-0004-03
- App
- On / Off / Auto control for 2 additional pumps
Price€2,362.50 + VATExpansion module · 2 pumps 2 HP
Code CH-OTM-0004-04
- App
- On / Off / Auto control for 2 additional pumps
Price€2,362.50 + VATExpansion module · 2 pumps 3 HP
Code CH-OTM-0004-05
- App
- On / Off / Auto control for 2 additional pumps
Price€2,362.50 + VAT
// 01 · Technical table
Connect & Go Expansion Modules technical values
Where a value changes from model to model, every option is listed in that row; the details for each model are in the model list below.
| Specification | Value |
|---|---|
| Manufacturer Code | 70695 / 70696 / 72731 / 72732 / 72733 |
| App | Supply and control of additional white lighting / Supply and control of additional RGB multicolour lighting / On / Off / Auto control for 2 additional pumps |
| Suitable pump power | 1 HP (single-phase) / 2 HP (single-phase) / 3 HP (single-phase) (on some models) |
| Transformer | 100 VA (on some models) |
| Compatibility | Any 12 V AC white lamp / LumiPlus Essential RGB, LumiPlus Design / Connect & Go cabinets |
// 02 · Use
Users and applications
The expansion modules are chosen to add lights or pumps later to a pool with a Connect & Go cabinet. The device to be added determines the choice: for a light, the white or RGB module; for a pump, the 1, 2 or 3 HP module according to motor power. The modules extend the existing control without replacing the cabinet.
- White light module for any 12 V AC white light
- RGB module for LumiPlus Essential RGB and LumiPlus Design
- On, Off, Auto control for two additional pumps
- Three separate versions for 1, 2 or 3 HP single-phase pumps
// 03 · Installation and compatibility
Installation and compatible equipment
The module is connected to the existing Connect & Go cabinet and becomes part of the cabinet's control. The light modules come with a 100 VA transformer fitted, so no external transformer is needed. For the pump modules, the version suited to the pump power is chosen. If needed, Connect & Go Connection Accessories are used for GPIO.
- A light or pump module is determined according to the device to be added.
- For the pump module, the 1, 2 or 3 HP version is chosen according to motor power.
- The module is installed together with the Connect & Go Connected Cabinet and connected to the cabinet.
- The cables of the additional lights or pumps are connected to the module.
// 04 · Maintenance
Maintenance checkpoints
Checking the module means reviewing the transparent window in the cover and the connections inside. The supply is switched off before the module is opened. On light modules the light line is checked, on pump modules the pump cables. If an added device does not operate in the expected position in the cabinet, the switch position and connections on the module are inspected first.
- The supply is switched off before working on the module.
- The light or pump cables are checked to be firmly connected.
- The On, Off and Auto positions are checked to work correctly.
- The cover is kept closed.
// 05 · Information form
Request information on this product
Leave your name and contact details, and your customer representative will get back to you about the models of this product, its fit for your pool and an up-to-date quote.
Subject of the form
Connect & Go Expansion Modules
- Product
- Connect & Go Expansion Modules
- Category
- Pool Mechanical Equipment
- Number of models
- 5
- Code
- CH-OTM-0004-01 ... CH-OTM-0004-05
Your request is recorded under the name of this product. If you prefer not to wait, you can also reach us on +90 216 475 39 37.
Your contact details
Name, surname, phone and email are enough.
// 06 · Reviews
Connect & Go Expansion Modules reviews
If you use this product or have used our service for it, share your experience. Every review is published after our team verifies it, and ratings are calculated from verified reviews only.
Average rating
0/5
Verified reviews: 0
- 5 out of 5 stars
- 0
- 4 out of 5 stars
- 0
- 3 out of 5 stars
- 0
- 2 out of 5 stars
- 0
- 1 out of 5 stars
- 0
Reviews are verified and published by the Çilek Havuz team. A product review covers the product itself; a service review covers delivery, installation and communication.
There are no verified reviews for this product yet. Be the first to write one.
Write a review// 07 · Related products
Products considered together
First the products in the same family, then the power, connection and control parts it needs to run, and finally the complementary products usually chosen with it.
- Connect & Go Connection Accessories
- Automation Gateways
- Fluidra Smart Plug Pool Smart Plug
- iQBridge RS Pool Automation Gateway
- Connect & Go Connected EnclosureParts used together
- Connect & Go Connection AccessoriesParts used together
- Zodiac Ei²Salt Electrolysis Systems
- Pool Water Test Strips & KitsWater Balance
// 08 · Services
Work carried out with this product
Connect & Go Expansion Modules can be purchased on its own or installed as part of a pool construction or maintenance project.
- Swimming Pool ConstructionReinforced-concrete, prefabricated and infinity swimming pools, built turnkey for villa, residential and commercial projects.
- Infinity PoolsPools that open onto the view, with water spilling over the edge into a balance tank.
- Prefabricated PoolsFast-install modular prefabricated pool systems.
- Pool MaintenanceWater chemistry, equipment and periodic maintenance.
- Pool ConsultingExpert consulting on project, materials and budget.
- Yakacık Msy Yapı · Villa PoolYakacık, Istanbul
// 09 · Guides
Selection and installation guides
These articles cover the calculations, comparisons and installation details considered when choosing and installing Connect & Go Expansion Modules.
// 10 · Data sheet and catalogue
Printable documents
The technical data sheet is a single A4 page. The product catalogue brings together the cover, images, model list and technical table.
- Product details
- Connect & Go Expansion Modules
- Model
- 5
- Code
- CH-OTM-0004-01 - CH-OTM-0004-05
- Category
- Pool Mechanical Equipment
// 11 · Design and catalogues
Set up your project on screen first, then review the products in our catalogues.
In the design studio you can build your space with its materials and colours; in the product catalogues you can see models, technical sheets and list prices.
Pool
Design studio
Build your pool, sauna, steam room or Turkish hammam on screen with lining, timber and marble options, then request a quote with your selection.
Where would you like to start?
Product catalogues
Models, technical sheets and list prices of our product groups are on the category pages.
Next step
Let us discuss your project in the way that suits you best.
You can fill in the form for a written quote, schedule a video project presentation or ask us to survey your project site.
Get a Quote
Send us your dimensions and expectations in writing.
Online presentation
Video project presentation
On-site survey
Inspection at your project site
// 12 · Company & Contact
To talk about your project, call or write to us.
Legal Name
Çilek Havuz
Founded
1998 · Istanbul
Head Office
Çilek Plaza, Eyüp Sultan Mah. Yakacık Cd. Feshane Cd. No: 2 D:4 D:1, 34885 Sancaktepe / İstanbul
Service Area
All of Türkiye · exports to 14 countries
Branches
Kyrgyzstan · Egypt · Algeria · Iraq
Showroom
Plan a showroom visit
At our showroom in Çilek Plaza, Sancaktepe, you can discuss your project with our team. We recommend booking an appointment by phone before your visit.
Working Hours
- Monday – Friday · 08:00 – 17:30
- Saturday · 08:00 – 12:30
- Closed on Sunday
Questions
About Connect & Go Expansion Modules: frequently asked questions
Çilek Havuz Corporate
Pool & Wellness Engineering
- Response Time
- Same day
- Channels
- Phone · Email · WhatsApp
If the answer you are looking for is not here, send your question directly to us and our team will reply as soon as possible.
+90 216 475 39 37The device to be added determines the choice. The white light module manages any 12 V AC white light, the RGB module manages LumiPlus Essential RGB and LumiPlus Design lights. There are three modules for pumps: 1, 2 and 3 HP. All five modules fit Connect & Go cabinets.
Çilek Havuz Corporate
Both carry a 100 VA transformer and provide additional lighting control. The white light module works with any 12 V AC white light. The RGB module is designed for multicolour light and manages LumiPlus Essential RGB and LumiPlus Design lights. The light colour is determined by the light type.
Çilek Havuz Corporate
The difference is in the pump motor power supported. All three modules manage two additional pumps with On, Off and Auto positions. The modules are for 1, 2 and 3 HP single-phase pumps. The motor power of the pump should not exceed the HP rating of the module; the choice is made on this rating.
Çilek Havuz Corporate
No, the module is added to an existing Connect & Go cabinet and works with it. If there is no cabinet, the Connect & Go Connected Cabinet is chosen first. The cabinet can be Basic, Basic Plus, Complete White or Full RGB. The module increases the number of lights and pumps the cabinet manages. These modules can be used on every cabinet model that needs an additional pump or light.
Çilek Havuz Corporate
The expansion modules add lights or pumps. The Connection Accessories include the GPIO expansion module, the standalone GPIO and Connect Box Plus; these add inputs and outputs or connect the system to a network. A module is chosen for pumps and lights, an accessory for additional GPIO.
Çilek Havuz Corporate
Yes, both the white and RGB light modules have a 100 VA transformer. So there is no need to buy an external transformer. No transformer rating is specified for the pump modules; the choice is made by pump power. The total light power is planned so that it does not exceed the transformer rating. The white and RGB modules carry the same 100 VA transformer rating.
Çilek Havuz Corporate
All five modules are compatible with Connect & Go cabinets. The cabinets consist of the Basic, Basic Plus, Complete White and Full RGB models, and all of them work with the expansion modules. The lighting modules also pair with LumiPlus Essential RGB and LumiPlus Design lights. The white light module works with any 12 V AC white light.
Çilek Havuz Corporate