Skip to content
Çilek Havuz

Pool Pumps

FloPro™ Single-Speed, Single Speed Pool Pump.

FloPro single speed is a self-priming pool pump that runs at a fixed speed of 2850 rpm, connected to the pool's filtration line. Çilek Havuz supplies FloPro Single Speed through quotes and as part of its projects. Its nine models range from 50M to 200T and offer 0.37-1.5 kW motor power and 10.3-27 m³/h nominal flow. The models are divided into single-phase (M) and three-phase (T). The connection is DN50 and DN63; the strainer basket is 2.6 litres.

Datasheet

CH-POM-0014-01

FloPro single speed pool pump at an angle, inlet with union on the left
Nominal Flow (Qn)
10.3-27m³/h
Rated Power (P2N)
0.37-1.5kW
Power supply
Single-phase or three-phase
List price
From €693 + VAT

Prices are list prices dated 16.06.2026, excluding VAT.

Before you choose

Suitable pool and installation

Models and price

9 models

List price €693 - €971.25 excl. VAT

Lowest list price: 50M

List price, excluding VAT. The final figure depends on quantity and scope and is given in the quotation.

Open the spec sheet
See all models and technical data

Compatibility and connections

Power supply
Single-phase or three-phase
Connection
DN50 and DN63, unions included
Operation
2850 rpm, single speed
Control
Filtration panel

// Models

FloPro™ Single-Speed models, with list prices and technical data.

9 products

  • 50M

    Recommended

    Code CH-POM-0014-01

    Nominal Flow (Qn)
    10.3 m³/h
    Rated Power (P2N)
    0.37 kW
    Phase
    Single-phase
    Price€693 + VAT

    50M

    Code CH-POM-0014-01

    €693 + VAT

    Manufacturer Code
    WP000147
    Type
    Self-priming pool pump
    Motor Type
    Asynchronous motor, TEFC, class F insulation
    Efficiency
    > 80 (IE3) %
    Power
    0.5 HP
    Rated Power (P2N)
    0.37 kW
    Phase
    Single-phase
    Frequency
    50 Hz
    Current
    3.5 A
    Nominal Flow (Qn)
    10.3 m³/h
    Max. Flow (Qmax)
    16.8 m³/h
    Max. Head (Hmax)
    17.8 m
    Speed (Low/Mid/High)
    2850 rpm
    Control
    Controlled by filtration panel
    Protection Class (IP)
    IPX5
    Connection
    DN50 & DN63 (2" threaded inlet/outlet, 63/50 mm unions included)
    Strainer basket volume
    2.6 l
    Water temperature range
    Up to 35 °C
    Salt concentration
    6000 ppm
    Length
    58.3 cm
    Width
    25.4 cm
    Height
    32.4 cm
    Manufacturer warranty
    3 years
    Weight
    16 kg
  • 75M

    Code CH-POM-0014-02

    Nominal Flow (Qn)
    13.2 m³/h
    Rated Power (P2N)
    0.55 kW
    Phase
    Single-phase
    Price€714 + VAT
  • 75T

    Code CH-POM-0014-03

    Nominal Flow (Qn)
    13.2 m³/h
    Rated Power (P2N)
    0.55 kW
    Phase
    Three-phase
    Price€777 + VAT
  • 100M

    Code CH-POM-0014-04

    Nominal Flow (Qn)
    15.8 m³/h
    Rated Power (P2N)
    0.75 kW
    Phase
    Single-phase
    Price€787.50 + VAT
  • 100T

    Code CH-POM-0014-05

    Nominal Flow (Qn)
    15.8 m³/h
    Rated Power (P2N)
    0.75 kW
    Phase
    Three-phase
    Price€819 + VAT
  • 150M

    Code CH-POM-0014-06

    Nominal Flow (Qn)
    20.8 m³/h
    Rated Power (P2N)
    1 kW
    Phase
    Single-phase
    Price€871.50 + VAT
  • 150T

    Code CH-POM-0014-07

    Nominal Flow (Qn)
    20.8 m³/h
    Rated Power (P2N)
    1 kW
    Phase
    Three-phase
    Price€903 + VAT
  • 200M

    Code CH-POM-0014-08

    Nominal Flow (Qn)
    27 m³/h
    Rated Power (P2N)
    1.5 kW
    Phase
    Single-phase
    Price€966 + VAT
  • 200T

    Code CH-POM-0014-09

    Nominal Flow (Qn)
    27 m³/h
    Rated Power (P2N)
    1.5 kW
    Phase
    Three-phase
    Price€971.25 + VAT

// 01 · Technical table

FloPro™ Single-Speed technical values

Where a value changes from model to model, every option is listed in that row; the details for each model are in the model list below.

FloPro™ Single-Speed technical values · 9 models
SpecificationValue
Manufacturer CodeWP000147 / WP000148 / WP000149 / WP000150 / WP000151 / WP000152 / WP000153 / WP000154 / WP000155
TypeSelf-priming pool pump
Motor TypeAsynchronous motor, TEFC, class F insulation
Efficiency> 80 (IE3) %
Power0.5 HP / 0.75 HP / 1 HP / 1.5 HP / 2 HP
Rated Power (P2N)0.37 kW / 0.55 kW / 0.75 kW / 1 kW / 1.5 kW
PhaseSingle-phase / Three-phase
Frequency50 Hz
Current3.5 A / 1.2 A / 4.2 A / 1.6 A / 6 A / 3.2 A / 7.6 A
Nominal Flow (Qn)10.3 m³/h / 13.2 m³/h / 15.8 m³/h / 20.8 m³/h / 27 m³/h
Max. Flow (Qmax)16.8 m³/h / 18.6 m³/h / 22.9 m³/h / 27.4 m³/h / 35.5 m³/h
Max. Head (Hmax)17.8 m / 20.7 m / 21.5 m / 22.3 m / 24.5 m
Speed (Low/Mid/High)2850 rpm
ControlControlled by filtration panel
Protection Class (IP)IPX5
ConnectionDN50 & DN63 (2" threaded inlet/outlet, 63/50 mm unions included)
Strainer basket volume2.6 l
Water temperature rangeUp to 35 °C
Salt concentration6000 ppm
Length58.3 cm / 54.3 cm / 55.3 cm / 56.8 cm
Width25.4 cm
Height32.4 cm
Manufacturer warranty3 years
Weight16 kg / 17 kg / 18 kg / 19 kg / 20 kg / 21 kg

// 02 · Use

Users and applications

FloPro single speed is chosen for pools looking for a circulation pump that runs at a fixed speed in the filtration line. The pump is switched on and off from the filtration panel; there is no speed adjustment. The model is determined by the flow requirement of the line and the supply type: 50M delivers 10.3 m³/h, 200M and 200T 27 m³/h nominal flow. Weights are between 16 and 21 kg.

  • Fixed speed filtration arrangement
  • M models for a single-phase supply
  • 75T, 100T, 150T and 200T for a three-phase supply
  • Plant rooms with DN50 or DN63 pipework
  • Pools using salt water up to 6000 ppm

// 03 · Installation and compatibility

Installation and compatible equipment

FloPro single speed is fitted between the suction line and the filter; 63/50 mm unions come in the package. The motor is supplied and protected through the Electrical Control Panel; the panel type is chosen according to motor power and phase. A Zodiac MS Sand Filter or a Zodiac CS Cartridge Filter is connected as the filter. The suction line is kept short and straight.

  1. The pump is placed on a level, dry floor in front of the filter.
  2. The suction line is connected to the inlet union and the discharge line to the outlet union.
  3. The pre-filter body is filled with water and the cover is closed.
  4. The supply is made through an Electrical Control Panel suited to the phase.

// 04 · Maintenance

Maintenance checkpoints

Routine work is removing the leaves and sediment collected in the 2.6 litre strainer basket while the pump is switched off. The cover is opened, the basket is cleaned and the cover is closed again. The pump shuts down through its safety system at high current or temperature; if shutdowns recur, the supply and the water flow are checked.

  • The strainer basket is opened and cleaned while the pump is switched off.
  • The suction line is checked for air leaks.
  • The union connections are checked for leaks.

// 05 · Information form

Request information on this product

Leave your name and contact details, and your customer representative will get back to you about the models of this product, its fit for your pool and an up-to-date quote.

Subject of the form

FloPro™ Single-Speed

Product
FloPro™ Single-Speed
Category
Pool Mechanical Equipment
Number of models
9
Code
CH-POM-0014-01 ... CH-POM-0014-09

Your request is recorded under the name of this product. If you prefer not to wait, you can also reach us on +90 216 475 39 37.

Your contact details

Name, surname, phone and email are enough.

Your personal data is processed in line with our Privacy Notice (KVKK).

// 06 · Reviews

FloPro™ Single-Speed reviews

If you use this product or have used our service for it, share your experience. Every review is published after our team verifies it, and ratings are calculated from verified reviews only.

Average rating

0/5

Verified reviews: 0

5 out of 5 stars
0
4 out of 5 stars
0
3 out of 5 stars
0
2 out of 5 stars
0
1 out of 5 stars
0

Reviews are verified and published by the Çilek Havuz team. A product review covers the product itself; a service review covers delivery, installation and communication.

There are no verified reviews for this product yet. Be the first to write one.

Write a review

Write a review

Once verified, your review is published with your name and city. Your email or phone number is never published.

Your rating

What is your review about?

Not published; used only to verify your review.

Your personal data is processed in line with our Privacy Notice (KVKK).

// 09 · Guides

Selection and installation guides

These articles cover the calculations, comparisons and installation details considered when choosing and installing FloPro™ Single-Speed.

// 10 · Data sheet and catalogue

Printable documents

The technical data sheet is a single A4 page. The product catalogue brings together the cover, images, model list and technical table.

Product details
FloPro™ Single-Speed
Model
9
Code
CH-POM-0014-01 - CH-POM-0014-09

// 11 · Design and catalogues

Set up your project on screen first, then review the products in our catalogues.

In the design studio you can build your space with its materials and colours; in the product catalogues you can see models, technical sheets and list prices.

Long villa pool with a travertine edge and olive trees at sunsetPool

Design studio

Build your pool, sauna, steam room or Turkish hammam on screen with lining, timber and marble options, then request a quote with your selection.

Where would you like to start?

Next step

Let us discuss your project in the way that suits you best.

You can fill in the form for a written quote, schedule a video project presentation or ask us to survey your project site.

  • Get a Quote

    Send us your dimensions and expectations in writing.

  • Online presentation

    Video project presentation

  • On-site survey

    Inspection at your project site

// 12 · Company & Contact

To talk about your project, call or write to us.

Legal Name

Çilek Havuz

Founded

1998 · Istanbul

Head Office

Çilek Plaza, Eyüp Sultan Mah. Yakacık Cd. Feshane Cd. No: 2 D:4 D:1, 34885 Sancaktepe / İstanbul

Service Area

All of Türkiye · exports to 14 countries

Branches

Kyrgyzstan · Egypt · Algeria · Iraq

Showroom

Plan a showroom visit

At our showroom in Çilek Plaza, Sancaktepe, you can discuss your project with our team. We recommend booking an appointment by phone before your visit.

Working Hours

  • Monday – Friday · 08:00 – 17:30
  • Saturday · 08:00 – 12:30
  • Closed on Sunday
Directions

Questions

About FloPro™ Single-Speed: frequently asked questions

Çilek Havuz Corporate

Pool & Wellness Engineering

Response Time
Same day
Channels
Phone · Email · WhatsApp

If the answer you are looking for is not here, send your question directly to us and our team will reply as soon as possible.

+90 216 475 39 37

The model is chosen according to the flow required by the filtration line. 50M delivers 10.3 m³/h, 75M and 75T 13.2 m³/h, 100M and 100T 15.8 m³/h, 150M and 150T 20.8 m³/h, 200M and 200T 27 m³/h nominal flow. Maximum head increases from 17.8 m to 24.5 m. The supply type is shown by the letter M or T.

Çilek Havuz Corporate

The difference is the supply: 100M is single-phase, 100T three-phase. Both deliver 1 HP and 0.75 kW motor power, 15.8 m³/h nominal flow and 21.5 m maximum head. Maximum amperage is 4.2 A on 100M and 1.6 A on 100T. The weight is 17 kg on 100M and 18 kg on 100T.

Çilek Havuz Corporate

FloPro single speed runs at a fixed speed of 2850 rpm and its speed is not adjusted. E30iQ offers 3 speed settings, FloPro VS 8 programmable speeds. The single speed series covers 0.5-2 HP with 9 models; E30iQ delivers 1 and 2 HP, FloPro VS 1.65 HP. The single speed pump is managed by a filtration panel, the variable speed pumps by their own display or iAquaLink.

Çilek Havuz Corporate

The pump is controlled by a filtration panel; the Electrical Control Panel is used for this purpose. The panel provides overload protection and a 24-hour programming timer for the pump. The type is chosen according to motor power and phase. There are separate power ranges for single-phase and three-phase lines.

Çilek Havuz Corporate

The pump is installed with a Zodiac MS Sand Filter or a Zodiac CS Cartridge Filter. On the MS filter, an operating pressure of 0.4-1.4 bar is given for a single speed pump. The CS cartridge filter comes with flow options of 22.7 and 28.4 m³/h. The filter is chosen large enough to handle the pump flow.

Çilek Havuz Corporate

The connection is DN50 and DN63; the 2 inch threaded inlet and outlet come in the package with 63/50 mm unions. Thanks to the unions, 50 and 63 mm pipework is connected without additional fittings. The suction line is kept short and straight; the straight run is left at four times the pipe diameter. If the pipework has a different diameter, a transition fitting is used.

Çilek Havuz Corporate

The strainer basket has a volume of 2.6 litres. Leaves and coarse sediment are held in the basket and do not pass into the pump body. The basket is emptied by opening the cover while the pump is switched off. The pump runs in water up to 35 °C and in salt water up to 6000 ppm. The pump is not run until the basket cover is seated; a leaking cover lets air into the suction line.

Çilek Havuz Corporate