Skip to content
Çilek Havuz

Water Testers

SD Series Digital Measurement Device, Water Tester.

The SD Series Digital Meter is a portable tester that measures the pH, ORP or salt value of pool water together with temperature. Çilek Havuz supplies SD Series through quotes and as part of its projects. It has three models: SD 50 pH, SD 60 ORP and SD 90 Salt. The instruments are IP67 protected, run on 2 AAA batteries and permanently store 25 data sets.

Datasheet

CH-KIM-0001-03

SD series digital tester pen from the front, green LCD, four buttons, navy cap and strap
Measurement
SD 50 pH, SD 60 ORP, SD 90 Salt; temperature on all
List price
From €467.25 + VAT

Prices are list prices dated 16.06.2026, excluding VAT.

Before you choose

Suitable pool and installation

Models and price

3 models

List price €467.25 - €609 excl. VAT

Lowest list price: SD 90 salt

List price, excluding VAT. The final figure depends on quantity and scope and is given in the quotation.

Open the spec sheet
See all models and technical data

Compatibility and connections

Measurement
SD 50 pH, SD 60 ORP, SD 90 Salt; temperature on all
Measuring range
0-60 °C; pH 0-14
Calibration
pH 1, 2 or 3-point automatic
Power supply
2 AAA batteries
Protection
IP67

// Models

SD Series Digital Measurement Device models, with list prices and technical data.

3 products

  • SD 50 pH

    Code CH-KIM-0001-01

    Measurement Type
    pH, temperature
    Price€525 + VAT
  • SD 60 ORP

    Code CH-KIM-0001-02

    Measurement Type
    ORP, temperature
    Price€609 + VAT
  • SD 90 salt

    Recommended

    Code CH-KIM-0001-03

    Measurement Type
    Salt, temperature
    Price€467.25 + VAT

    SD 90 salt

    Code CH-KIM-0001-03

    €467.25 + VAT

    Manufacturer Code
    68066
    Measurement Type
    Salt, temperature
    Measuring range
    0-60 °C, < 20.00 ppt (2.00%)
    Sensitivity (resolution)
    1 ppm (< 2000 ppm), 0.01 ppt (2.0 - 20.00 ppt)
    Measurement accuracy
    ± 3% FS
    Calibration
    2-point manual calibration or specified value ± 50%
    Temperature accuracy
    0.1 °C resolution, ± 1 °C; selectable °C/°F
    Temperature compensation
    Automatic
    Memory
    25 data sets (permanent)
    Display
    22 x 22 mm LCD
    Protection Class
    IP67
    Power Source
    2 x AAA batteries
    Battery life
    > 25 h
    Auto power-off
    8 min
    Certification
    UNE-ISO 17381

// 01 · Technical table

SD Series Digital Measurement Device technical values

Where a value changes from model to model, every option is listed in that row; the details for each model are in the model list below.

SD Series Digital Measurement Device technical values · 3 models
SpecificationValue
Manufacturer Code68110 / 68064 / 68066
Measurement TypepH, temperature / ORP, temperature / Salt, temperature
Measuring range0-60 °C, 0-14 pH / 0-60 °C / 0-60 °C, < 20.00 ppt (2.00%)
Sensitivity (resolution)0.01 pH / 0.01 mV (up to ±1000 mV), 1 mV (beyond ±1000 mV) / 1 ppm (< 2000 ppm), 0.01 ppt (2.0 - 20.00 ppt)
Measurement accuracy± 0.05 pH / ± 20 mV / ± 3% FS
Calibration1, 2 or 3-step automatic / 1-point ± 150 mV calibration or ORP value entry / 2-point manual calibration or specified value ± 50%
Temperature accuracy0.1 °C resolution, ± 1 °C; selectable °C/°F
Temperature compensationAutomatic
Memory25 data sets (permanent)
Display22 x 22 mm LCD
Protection ClassIP67
Power Source2 x AAA batteries
Battery life> 25 h
Auto power-off8 min / 20 min
CertificationUNE-ISO 17381

// 02 · Use

Users and applications

The SD Series is chosen by users who want to measure pool water on the spot. The model is determined by the value to be measured: SD 50 for pH, SD 60 for redox potential and SD 90 for salt. Each model also shows temperature. The instrument keeps 25 measurement results in its memory, and temperature can be set to °C or °F.

  • SD 50 pH for measuring pH together with temperature
  • SD 60 ORP for reading the ORP value in mV
  • SD 90 Salt for reading the salt value in ppt or ppm
  • Storage of measurement results in 25 data sets

// 03 · Installation and compatibility

Installation and compatible equipment

The SD Series needs no fixed installation. Use starts by inserting 2 AAA batteries. The model is calibrated before measurement: 1, 2 or 3-point automatic calibration for the SD 50 pH, single-point ± 150 mV calibration for the SD 60 ORP, and two-point manual calibration for the SD 90 Salt.

  1. 2 AAA batteries are inserted into the instrument.
  2. The calibration procedure suited to the model is selected.
  3. The temperature unit is set to °C or °F.
  4. The measurement is taken and the result is saved to one of the 25 data sets in memory.

// 04 · Maintenance

Maintenance checkpoints

Measurement accuracy depends on calibration; the instrument is set according to the calibration procedure of the model. Battery life is over 25 hours. The SD 50 pH and SD 90 Salt switch off automatically after 8 minutes, the SD 60 ORP after 20 minutes. The housing is IP67 protected; after the battery compartment has been opened, the cover is checked for a proper seat.

  • Calibration is carried out according to the number of points the model supports.
  • Battery level is monitored against the 25-hour operating life.
  • IP67 protection is maintained once the battery compartment cover is closed.
  • The 25 stored data sets are noted down for later use when needed.

// 05 · Information form

Request information on this product

Leave your name and contact details, and your customer representative will get back to you about the models of this product, its fit for your pool and an up-to-date quote.

Subject of the form

SD Series Digital Measurement Device

Product
SD Series Digital Measurement Device
Category
Pool Chemicals
Number of models
3
Code
CH-KIM-0001-01 ... CH-KIM-0001-03

Your request is recorded under the name of this product. If you prefer not to wait, you can also reach us on +90 216 475 39 37.

Your contact details

Name, surname, phone and email are enough.

Your personal data is processed in line with our Privacy Notice (KVKK).

// 06 · Reviews

SD Series Digital Measurement Device reviews

If you use this product or have used our service for it, share your experience. Every review is published after our team verifies it, and ratings are calculated from verified reviews only.

Average rating

0/5

Verified reviews: 0

5 out of 5 stars
0
4 out of 5 stars
0
3 out of 5 stars
0
2 out of 5 stars
0
1 out of 5 stars
0

Reviews are verified and published by the Çilek Havuz team. A product review covers the product itself; a service review covers delivery, installation and communication.

There are no verified reviews for this product yet. Be the first to write one.

Write a review

Write a review

Once verified, your review is published with your name and city. Your email or phone number is never published.

Your rating

What is your review about?

Not published; used only to verify your review.

Your personal data is processed in line with our Privacy Notice (KVKK).

// 09 · Guides

Selection and installation guides

These articles cover the calculations, comparisons and installation details considered when choosing and installing SD Series Digital Measurement Device.

// 10 · Data sheet and catalogue

Printable documents

The technical data sheet is a single A4 page. The product catalogue brings together the cover, images, model list and technical table.

Pool Maintenance
Product details
SD Series Digital Measurement Device
Model
3
Code
CH-KIM-0001-01 - CH-KIM-0001-03

// 11 · Design and catalogues

Set up your project on screen first, then review the products in our catalogues.

In the design studio you can build your space with its materials and colours; in the product catalogues you can see models, technical sheets and list prices.

Long villa pool with a travertine edge and olive trees at sunsetPool

Design studio

Build your pool, sauna, steam room or Turkish hammam on screen with lining, timber and marble options, then request a quote with your selection.

Where would you like to start?

Next step

Let us discuss your project in the way that suits you best.

You can fill in the form for a written quote, schedule a video project presentation or ask us to survey your project site.

  • Get a Quote

    Send us your dimensions and expectations in writing.

  • Online presentation

    Video project presentation

  • On-site survey

    Inspection at your project site

// 12 · Company & Contact

To talk about your project, call or write to us.

Legal Name

Çilek Havuz

Founded

1998 · Istanbul

Head Office

Çilek Plaza, Eyüp Sultan Mah. Yakacık Cd. Feshane Cd. No: 2 D:4 D:1, 34885 Sancaktepe / İstanbul

Service Area

All of Türkiye · exports to 14 countries

Branches

Kyrgyzstan · Egypt · Algeria · Iraq

Showroom

Plan a showroom visit

At our showroom in Çilek Plaza, Sancaktepe, you can discuss your project with our team. We recommend booking an appointment by phone before your visit.

Working Hours

  • Monday – Friday · 08:00 – 17:30
  • Saturday · 08:00 – 12:30
  • Closed on Sunday
Directions

Questions

About SD Series Digital Measurement Device: frequently asked questions

Çilek Havuz Corporate

Pool & Wellness Engineering

Response Time
Same day
Channels
Phone · Email · WhatsApp

If the answer you are looking for is not here, send your question directly to us and our team will reply as soon as possible.

+90 216 475 39 37

The measured value determines the model: the SD 50 measures pH, the SD 60 ORP and the SD 90 salt. All three models also show temperature. The measuring ranges differ: 0-14 pH for the SD 50, and salt values below 20.00 ppt for the SD 90. The model is chosen according to the value to be measured.

Çilek Havuz Corporate

The SD Series consists of the SD 50, SD 60 and SD 90 models and runs on 2 AAA batteries. The SD Series 2025 includes the SD10, SD20, SD30 and SD40 models, uses 4 AAA batteries and has a 3-colour display. Conductivity measurement is available only in the 2025 series.

Çilek Havuz Corporate

Accuracy is ± 0.05 pH and resolution 0.01 pH. The measuring range is 0-14 pH. Temperature is compensated automatically and shown with 0.1 °C resolution. Calibration can be set to 1, 2 or 3-point automatic; the instrument switches off automatically after 8 minutes and readings are saved to 25 data sets.

Çilek Havuz Corporate

Salt values below 20.00 ppt are measured with the SD 90 Salt. It reads with 1 ppm resolution below 2000 ppm and 0.01 ppt resolution between 2.0 and 20.00 ppt. Its accuracy is ± 3% FS. Calibration is two-point manual or within ± 50% of the specified value.

Çilek Havuz Corporate

It is calibrated with single-point ± 150 mV calibration or by entering the ORP value. Its accuracy is ± 20 mV. It reads with 0.01 mV resolution up to ± 1000 mV and 1 mV above this value. The measuring range is given together with temperature at 0-60 °C, and the instrument switches off automatically after 20 minutes.

Çilek Havuz Corporate

The housing is IP67 protected. The instrument has a 22 x 22 mm LCD display and runs on 2 AAA batteries; battery life is over 25 hours. Measurement results are stored permanently in 25 data sets. IP67 protection is maintained by fully closing the battery compartment cover, and the display is backlit.

Çilek Havuz Corporate

Yes, temperature can be set to °C or °F. Temperature is shown with 0.1 °C resolution and ± 1 °C accuracy, the measuring range is 0-60 °C and temperature compensation is automatic. The SD 50 pH, SD 60 ORP and SD 90 Salt read temperature alongside the main value.

Çilek Havuz Corporate