Aral Plus C-1500, Cast Iron Pool Pump.

The connection diameter increases with power. On the 4 and 5.5 HP models, suction is 100 mm and discharge 80 mm. On the 7.5 and 10 HP models, suction is 125 mm and discharge 100 mm. On the 12.5 and 15 HP models, suction is 150 mm and discharge 100 mm. On the 20 and 25 HP models, suction is 200 mm and discharge 125 mm.

Çilek Havuz Corporate

Aral Plus C-1500 runs at 1450 rpm with a four-pole motor and is available from 4 to 25 HP; the 15, 20 and 25 HP models exist only in this series. Aral Plus C-3000 runs at 3000 rpm with a two-pole motor and is available from 3 to 12.5 HP. C-1500 is chosen where a high flow rate and low speed are needed, and C-3000 for a smaller, higher-speed pump.

Çilek Havuz Corporate

The motor is four-pole and runs at approximately 1450 rpm on a 50 Hz supply. Because the speed is low, the pump operates at a low noise level and delivers a high flow rate for large pools. The series with a two-pole 3000 rpm motor is Aral Plus C-3000. The series is chosen by the flow rate of the line.

Çilek Havuz Corporate

The large models deliver a high flow rate. At 10 m head, the 15 HP model delivers 175, the 20 HP model 287 and the 25 HP model 369 m³/h. At 14 m head, the same models deliver 146, 222 and 324 m³/h. These three models are supplied only for 400/690 V three-phase. Their weights are 243, 298 and 314 kg.

Çilek Havuz Corporate

The 4, 5.5 and 7.5 HP models are available in both 230/400 V and 400/690 V versions. 10 HP and above come only in 400/690 V. The 4 HP model draws 10.5 A at 230 V and 6 A at 400 V. The 25 HP model draws 33.5 and 19.4 A in the 400/690 V version.

Çilek Havuz Corporate

Yes, a bronze impeller option is available for Aral Plus C-1500. The body is cast iron and is coated against corrosion by cataphoresis. When ordering the option, the power and voltage of the pump are specified. The power range is between 4 and 25 HP, and the motor runs at 1450 rpm.

Çilek Havuz Corporate